ELS-DR: Adjustable Levelling Switch, Dual Relay Output

$302.50

Applications:
  •  Man lift platform levelling
  •  Recreational vehicle auto-levelling
  • Roller shutter door controls
  • Container levelling
  • Can be readily customised to suit most applications
SKU: ELS-DR-5-2-1 Category:

Description

A tilt switch with dual relay outputs designed primarily for levelling systems.
The switching threshold is adjusted using the pcb mounted rotary switch. If the tilt exceeds the threshold with clockwise tilt, relay 1 will be switched on, and will switch off when the angle returns to zero (or below). Conversely it the tilt exceeds the threshold with counter clockwise tilt, relay 2 will be switched on, and will switch off when  the angle returns to zero (or above).
In this configuration the tilt switch can be used to drive motorised or hydraulic actuators to maintain a system in a level position.
To make installation easy, it can be mounted horizontally or vertically, and there is a switch to set the zero position after installation.
The unit utilises a high precision MEMS sensing element and is available with and without temperature compensation, which improves the accuracy over a wider operating range.
Features:
  •  Single axis levelling controller with dual relay output
  • Adjustable switching threshold from 0.2 to 4.8°
  • ‘ZERO’ button to set zero after installation
  • Small size and low power consumption.
  • No moving parts means no servicing and long life
  •  High precision switching threshold
  •  Mercury free and RoHS compliant
  •  Sealed to IP65 and CE certified
Applications:
  •  Man lift platform levelling
  •  Recreational vehicle auto-levelling
  • Roller shutter door controls
  • Container levelling
  • Can be readily customised to suit most applications
Specifications:

Part Number                                 ELS-DR-5-2-1                                             Notes


Switching Range                         1.8 – 4.8°                                                Range is adjustable via the 16 position PCB rotary switch
Adjustment Step                         0.2°                                                        Adjustment resolution of the rotary switch
Switching Accuracy                    ±0.1°                                                      Switching Accuracy at 20°C
Bandwidth (-3dB)                       0.5Hz, 1Hz or 2Hz                              2nd order Bessel filter on sensor output. Can be factory configured between 0.1 and 16Hz on request
Power Supply                               8-35Vdc                                                Reverse polarity protected internally
Current                                         10-40mA (with 8V supply)                Increases to 40mA when relay is switched. Current reduces with increasing supply voltage
Relay Switching Capacity
Maximum voltage                       220Vdc, 250Vac                                  Maximum switching capacity of relays. Relay contact life is shortened depending on switching current.
Maximum current                      2A
Maximum power                        60W
Dimensions                                 65x60x40mm                                        PCB only version available on request
Operational Temperature        -40 to 85°C
Storage Temperature                -40 to 85°C
Cable Length                               2m
Sealing                                         IP65